Mortise Pick Tip

As a locksmith technician. you tend to run into jobs sometimes that will give many aggravations. Most of the jobs I found to be difficult and time consuming are commercial type jobs. Recently i got called to an  office building downtown. The customer who called me had a private office in the building and he seem to misplace the keys to the office. Normally, most of the office doors I ran into during my years in the field all had a Mortise type lock. These locks are much more heavy duty than the traditional standard key-in-knob lock and sometimes can be a hassle to open them. The Mortise mechanism is fairly complex which makes it very difficult to pick.

Once I got to the job site, all my suspicions turned to be true. The office door did had a Mortise type lock on it. There are only two options usually when facing this type of lockout job. One is to try and pick the lock, the other is drill and replace the lock with a new one. Unfortunately, that day I did not have any Mortises with me in the service vehicle, and I was also under the impression the customer will not be so thrill to pay extra couple hundreds because he lost his keys.

I reached out to my picking tool set and started working on the lock. As I was working it, I had some trouble turning it as the cylinder required a lot of force to turn, and my skinny pick tool set just wasn't cutting it. I then remembered of an advice one of my fellow locksmith technicians gave me once about using a key blank as an extra force to get the cylinder to turn and at the same time prevent from the pins to fall and mess the cylinder. Luckily, I did have a blank for that type of Mortise cylinder with me, so I figured it was worth a try. What I had to do was pick the lock with my pick tool just enough to turn it a little and then use the blank to turn it all the way to retract the bolt, and it worked! The customer was very satisfied from the fact I could open the door without drilling the lock and even gave me a tip.

Visit the following links for more info on Reno locksmith solutions. | NorthWest Locksmith Reno services.    

Advertising Your Locksmith Business

The simplest way to get your new locksmith business going is business cards. The

card should point on the main services that you offer and have a clear presentation of your and company name, phone number, and website they can visit (if you have one), so they can get some more info about services you offer. You should also keep it simple and easy to read.

Business cards can be used in many ways to be effective. Always keep the cards handy, so you can give them to your customers in case they would need your services in the future especially commercial property customers as those can be a long term business relationship. It is also a good practice to make arrangement with business stores in the area such as hardware stores, service stations, auto parts store, and more, where they can put your business cards by their cash registers, so they will be visible for the customers who come to the store. A good practice will also be arranging door-to-door distribution of your business card around the closest neighborhoods around you.

Visit the following links if you need locksmith services in Reno, NV | Locksmith solutions in Reno.